The ReductoClip ceiling soundproofing solution is designed to exceed the UK Part E Building Regulations for the passage of sound. (43dB or higher for airborne noise and 64dB or lower for impact noise).

Soundproofing a ceiling will reduce the noise from noisy neighbours (e.g. heavy footsteps and loud airborne noise).

*dB results will vary depending on several factors.

Learn more: Why dB results may vary

The best way to soundproof a ceiling follows three main principles:

  1. Improve the mass of the ceiling. The heavier and more dense the ceiling is, the harder it is for sound to pass through it. Use different high density materials, as different materials are better at blocking different sound frequencies. It is the law of diminishing returns if simply using more of the same material
  2. Use high impact clips and bars such as the ReductoClip and Furring Bar System which help to absorb sound energy and vibration. Without this the addition of mass will have very little effect on impact noise
  3. Fill all cavities between joists with acoustic mineral wool. For concrete ceilings use acoustic mineral wool between the concrete ceiling and the first layer of acoustic plasterboard. This will prevent sound resonating and amplifying in this sealed chamber

Learn more: How to soundproof a ceiling

The ReductoClip ceiling system is the thinnest clip system on the market, with minimal space loss.

The system is only a 60mm build up from the bottom of the timber joist to the final layer of plasterboard. 

Cutting holes into soundproofing is always going to create a weakness. Therefore, recessed lighting isn't advisable. Ideally slim LED surface mounted spotlights, or single pendant lighting fixed onto the ceiling is the preferred option over and above lighting inside of the ceiling. 

If possible, the recommendation would be to soundproof the floor above against impact noise (e.g. footsteps). Absorbing impact noise at source (before it enters the structure) is preferable.

Our soundproofing solutions can all be installed by a competent DIYer and over 80% of customers install the systems themselves. For those that don't, then a local tradesperson will have no difficulty installing our solutions. We supply detailed installation instructions and videos and are only ever a phone call away should you have any questions (01423) 206208.

Learn more: Installation