• High-Quality Construction: MR-MDF boards are manufactured from Tongue & Groove moisture-resistant MDF,
• Precise Dimensions: Each board measures 1200mm x 600mm x 9mm, featuring tongue and grooves on all edges for easy and seamless fitting.
• Ideal for Tiling: When tiling over the overlay board, simply follow the tile manufacturer’s instructions, utilizing an S1 Tile adhesive and a decoupling membrane in conjunction with the board for optimal results.
• Easy Installation: The boards should be fitted in a brick bond pattern at a 90-degree orientation to the direction of the Soundmats, with glued T&G joints. We recomend the Boards are glued to the SoundMats with Isobond adhesive too.

FlexiSound 5 Self-Adhesive also provides an effective alternative to Tecsound SY100 and is a versatile material that can be used in lots of different ways; from reducing resonance in metal structures to upgrading the sound reduction of soundproofing systems.

• Dimensions: Length: 4.5m, Width: 1m, Area: (4.5m²) Thickness: 5mm
• Anti-vibration: Dampens sound energy and vibration. An ideal solution to solving vibration problems
• Easy to install: Convenient and quick installation, with a self-adhesive backing and easy to cut
• High Mass: For reducing airborne noise

SoundScreed 18 is a high mass floor soundproofing solution used to reduce high levels of airborne noise, helping to create peace and quiet within your home.

SoundScreed 18 provides a strong, level and stable base for hard floor finishes which removes the need for a stabilising layer, helping to reduce installation time and costs.

Installed directly onto floor joists replacing existing floorboards (and minimising floor heights) or overlaid onto existing floorboards.

 Whether you require peace and quiet from noisy neighbours living above or below, or privacy between floors within your own home, then SoundScreed 18 is an excellent solution.

T&G edge profile for easy installation.

Direct to floor joists:

To minimise floor height build up whilst improving the airborne soundproofing capabilities of the floor

Secondary Floor Battens:

Used as a structural floor on acoustic cradles and isolated secondary floor battens. The use of secondary floor battens will enhance both airborne and impact sound performance

Floating over underfloor heating:

Used as a floating construction on top of thermal insulation (PIR) above underfloor heating systems with a far greater thermal conductivity than standard chipboard floors

Overlaid on an existing floor:

Used as an overlay board on an existing solid sub floor when floor height is not restricted. Impact performance can be improved by the addition of ProSound ImpactoMat 5

For use with ProSound ReversoSoundMat as a joint finishing compound (1 tub covers 20m2)

A D1T, off-white, water-borne ready mixed interior grade adhesive paste.

Has excellent grip properties, which reduces or eliminates the need for battens or spacers. It provides the user with an easy to apply, general purpose adhesive with spreading characteristics, which suit both the DIY and professional user.

Used to Bont it Tile Adhesive

Tecsound 100 (Non-adhesive)

(4m x 1.2m x 5.3mm) Non-Adhesive (4.8m2)

Tecsound 100 (Non-adhesive) is a proven soundproofing product used for walls, ceilings and floors.
Its unique viscos-elastic properties combined with a high mass of 10kg per meter squared and provides excellent sound insulating properties.

Tecsound 100 works by adding mass to a structure (it has the same mass as lead) to block airborne noise. When bonded to materials such as plasterboard the viscos-elastic properties also reduce the sound resonance / vibration typical of hard materials, resulting in a higher performance material compared to Mass Loaded Vinyl and Green Glue combined.

Tecsound 100 (Non-adhesive) is the standard for soundproofing walls, ceilings and floors and is the choice among many studio builders, architects, contractors, and recording studio designers. And when combined with plasterboard, together they provide a very measurable improvement in noise control.

Tecsound 100 was first introduced to the soundproofing industry as a replacement for lead sheeting. Lead sheeting had been the soundproofing agent of choice for several years but, as we all know, lead was later determined to be a toxic agent and the need to find a replacement product became imperative.

• Vibration reduction: an ideal solution to solving vibration problems.
• Practical: bitumen-free and totally recyclable.
• High Mass: for blocking airborne noise.

Tecsound 70 (Non-Adhesive)

(5.05m x 1.22m x 3.5mm) Non-Adhesive (6.16m2)

Tecsound 70 (Non-adhesive) is a proven soundproofing product used for walls, ceilings and floors.
Its unique viscos-elastic properties combined with a high mass of 7kg per meter squared and provides excellent sound insulating properties.

Tecsound 70 works by adding mass to a structure (it has the same mass as lead) to block airborne noise. When bonded to materials such as plasterboard the viscos-elastic properties also reduce the sound resonance / vibration typical of hard materials, resulting in a higher performance material compared to Mass Loaded Vinyl and Green Glue combined.

Tecsound 70 (Non-adhesive) is the standard for soundproofing walls, ceilings and floors and is the choice among many studio builders, architects, contractors, and recording studio designers. And when combined with plasterboard, together they provide a very measurable improvement in noise control.

Tecsound 70 was first introduced to the soundproofing industry as a replacement for lead sheeting. Lead sheeting had been the soundproofing agent of choice for several years but, as we all know, lead was later determined to be a toxic agent and the need to find a replacement product became imperative.

• Vibration reduction: an ideal solution to solving vibration problems.
• Practical: bitumen-free and totally recyclable.
• High Mass: for blocking airborne noise.

Tecsound 50 (Non-adhesive)

(1.2m x 6.05m x 2.5mm) Non-Adhesive (7.26m2)

Tecsound 50 (Non-adhesive) is a proven soundproofing product used for walls, ceilings and floors.
Its unique viscos-elastic properties combined with a high mass of 5kg per meter squared and provides excellent sound insulating properties.

Tecsound 50 works by adding mass to a structure (it has the same mass as lead) to block airborne noise. When bonded to materials such as plasterboard the viscos-elastic properties also reduce the sound resonance / vibration typical of hard materials, resulting in a higher performance material compared to Mass Loaded Vinyl and Green Glue combined.

Tecsound 50 (Non-adhesive) is the standard for soundproofing walls, ceilings and floors and is the choice among many studio builders, architects, contractors, and recording studio designers. And when combined with plasterboard, together they provide a very measurable improvement in noise control.

Tecsound 50 was first introduced to the soundproofing industry as a replacement for lead sheeting. Lead sheeting had been the soundproofing agent of choice for several years but, as we all know, lead was later determined to be a toxic agent and the need to find a replacement product became imperative.

• Vibration reduction: an ideal solution to solving vibration problems.
• Practical: bitumen-free and totally recyclable.
• High Mass: for blocking airborne noise.

Different soundproofing layers of mass coupled with an impact dampening layer are cleverly combined in one easy to install product which greatly improves the soundproofing capabilities of timber floors.

The built in stabilising layer makes the Reverso SoundMat particularly suited to hard floor final finishes, as the majority of all hard floor finishes can be installed on top. (This removes the need of a stabilising layer, which reduces time and costs.)

Whether you require peace and quiet from noisy neighbours living above or below, or privacy between floors within your own home, then the Reverso SoundMat is an excellent solution. 

Used to apply IsoBond Rubber adhesive

B1 Notch pattern